ひでみのアイデア帳

くだらないことなんだけど、忘れないために・・・

まぁ、今日はこれでよかろう。超苦労したし・・・

ここまで持ってくるのが面倒だぞ・・・

Xilinx Zynq MP First Stage Boot Loader 
Release 2018.2   Jun 30 2018  -  21:22:14                                       
Reset Mode      :       System Reset                                            
Platform: Silicon (4.0), Cluster ID 0x80000000                                  
Running on A53-0 (64-bit) Processor, Device Name: XCZU3EG                       
Processor Initialization Done                                                   
================= In Stage 2 ============                                       
SD0 Boot Mode                                                                   
SD: rc= 0                                                                       
File name is BOOT.BIN                                                           
Multiboot Reg : 0x0                                                             
Image Header Table Offset 0x8C0                                                 
*****Image Header Table Details********                                         
Boot Gen Ver: 0x1020000                                                         
No of Partitions: 0x4                                                           
Partition Header Address: 0x440                                                 
Partition Present Device: 0x0                                                   
Initialization Success                                                          
======= In Stage 3, Partition No:1 =======                                      
UnEncrypted data Length: 0x153E27                                               
Data word offset: 0x153E27                                                      
Total Data word length: 0x153E27                                                
Destination Load Address: 0xFFFFFFFF                                            
Execution Address: 0x0                                                          
Data word offset: 0xED70                                                        
Partition Attributes: 0x26                                                      
Destination Device is PL, changing LoadAddress                                  
Non authenticated Bitstream download to start now                               
DMA transfer done                                                               
PL Configuration done successfully                                              
Partition 1 Load Success                                                        
======= In Stage 3, Partition No:2 =======                                      
UnEncrypted data Length: 0x31F4                                                 
Data word offset: 0x31F4                                                        
Total Data word length: 0x31F4                                                  
Destination Load Address: 0xFFFEA000                                            
Execution Address: 0xFFFEA000                                                   
Data word offset: 0x162BA0                                                      
Partition Attributes: 0x116                                                     
Partition 2 Load Success                                                        
======= In Stage 3, Partition No:3 =======                                      
UnEncrypted data Length: 0x2E046                                                
Data word offset: 0x2E046                                                       
Total Data word length: 0x2E046                                                 
Destination Load Address: 0x8000000                                             
Execution Address: 0x8000000                                                    
Data word offset: 0x165DA0                                                      
Partition Attributes: 0x114                                                     
Partition 3 Load Success                                                        
All Partitions Loaded                                                           
================= In Stage 4 ============                                       
PM Init Success                                                                 
Protection configuration applied                                                
Running Cpu Handoff address: 0xFFFEA000, Exec State: 0                          
Exit from FSBL                                                                  
PMUFW:  v1.0                                                                    

U-Boot 2018.01-00029-g987756e598-dirty (Jul 03 2018 - 00:05:04 +0900) Xilinx Zy1

I2C:   ready                                                                    
DRAM:  2 GiB                                                                    
EL Level:       EL2                                                             
Chip ID:        zu3eg                                                           
MMC:   sdhci@ff160000: 0 (SD), sdhci@ff170000: 1                                
Using default environment                                                       

In:    serial@ff010000                                                          
Out:   serial@ff010000                                                          
Err:   serial@ff010000                                                          
Bootmode: SD_MODE                                                               
Net:   Net Initialization Skipped                                               
No ethernet found.                                                              
Hit any key to stop autoboot:  0                                                
switch to partitions #0, OK                                                     
mmc0 is current device                                                          
Device: sdhci@ff160000                                                          
Manufacturer ID: 74                                                             
OEM: 4a60                                                                       
Name: USDU1                                                                     
Tran Speed: 50000000                                                            
Rd Block Len: 512                                                               
SD version 3.0                                                                  
High Capacity: Yes                                                              
Capacity: 14.9 GiB                                                              
Bus Width: 4-bit                                                                
Erase Group Size: 512 Bytes                                                     
reading system.dtb                                                              
33411 bytes read in 18 ms (1.8 MiB/s)                                           
reading Image                                                                   
14414336 bytes read in 1035 ms (13.3 MiB/s)                                     
## Flattened Device Tree blob at 04000000                                       
   Booting using the fdt blob at 0x4000000                                      
   Loading Device Tree to 000000007dec8000, end 000000007ded3282 ... OK         

Starting kernel ...                                                             

[    0.000000] Booting Linux on physical CPU 0x0                                
[    0.000000] Linux version 4.14.0-00061-gebfe386588bf-dirty (hidemi@sakura) (8
[    0.000000] Boot CPU: AArch64 Processor [410fd034]                           
[    0.000000] Machine model: ZynqMP ZCU100 RevC                                
[    0.000000] efi: Getting EFI parameters from FDT:                            
[    0.000000] efi: UEFI not found.                                             
[    0.000000] cma: Reserved 256 MiB at 0x000000006dc00000                      
[    0.000000] psci: probing for conduit method from DT.                        
[    0.000000] psci: PSCIv1.1 detected in firmware.                             
[    0.000000] psci: Using standard PSCI v0.2 function IDs                      
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.                           
[    0.000000] percpu: Embedded 21 pages/cpu @ffffffc07ff71000 s45080 r8192 d326
[    0.000000] Detected VIPT I-cache on CPU0                                    
[    0.000000] CPU features: enabling workaround for ARM erratum 845719         
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 517120    
[    0.000000] Kernel command line: root=/dev/mmcblk0p2 rw rootwait             
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)             
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) 
[    0.000000] Memory: 1786364K/2097152K available (9788K kernel code, 636K rwd)
[    0.000000] Virtual kernel memory layout:                                    
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 )
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 )
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008a10000   (  9792 )
[    0.000000]     .rodata : 0xffffff8008a10000 - 0xffffff8008d20000   (  3136 )
[    0.000000]       .init : 0xffffff8008d20000 - 0xffffff8008da0000   (   512 )
[    0.000000]       .data : 0xffffff8008da0000 - 0xffffff8008e3f200   (   637 )
[    0.000000]        .bss : 0xffffff8008e3f200 - 0xffffff800905b330   (  2161 )
[    0.000000]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 )
[    0.000000]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 )
[    0.000000]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 )
[    0.000000]               0xffffffbf00000000 - 0xffffffbf01c00000   (    28 )
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc080000000   (  2048 )
[    0.000000] Hierarchical RCU implementation.                                 
[    0.000000]  RCU event tracing is enabled.                                   
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.            
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4     
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0                   
[    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000          
[    0.000000] GIC: Using split EOI/Deactivate mode                             
[    0.000000] arch_timer: cp15 timer(s) running at 99.99MHz (phys).            
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
[    0.000004] sched_clock: 56 bits at 99MHz, resolution 10ns, wraps every 4398s
[    0.000305] Console: colour dummy device 80x25                               
[    0.000570] console [tty0] enabled                                           
[    0.000592] Calibrating delay loop (skipped), value calculated using timer f)
[    0.000608] pid_max: default: 32768 minimum: 301                             
[    0.000728] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)     
[    0.000747] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.001496] ASID allocator initialised with 65536 entries                    
[    0.001549] Hierarchical SRCU implementation.                                
[    0.001884] EFI services will not be available.                              
[    0.001921] zynqmp_plat_init Platform Management API v1.0                    
[    0.001930] zynqmp_plat_init Trustzone version v1.0                          
[    0.002045] smp: Bringing up secondary CPUs ...                              
[    0.002334] Detected VIPT I-cache on CPU1                                    
[    0.002370] CPU1: Booted secondary processor [410fd034]                      
[    0.002676] Detected VIPT I-cache on CPU2                                    
[    0.002695] CPU2: Booted secondary processor [410fd034]                      
[    0.002977] Detected VIPT I-cache on CPU3                                    
[    0.002996] CPU3: Booted secondary processor [410fd034]                      
[    0.003038] smp: Brought up 1 node, 4 CPUs                                   
[    0.003076] SMP: Total of 4 processors activated.                            
[    0.003086] CPU features: detected feature: 32-bit EL0 Support               
[    0.003099] CPU: All CPU(s) started at EL2                                   
[    0.003118] alternatives: patching kernel code                               
[    0.004184] devtmpfs: initialized                                            
[    0.008305] random: get_random_u32 called from bucket_table_alloc+0x108/0x260
[    0.008501] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
[    0.008525] futex hash table entries: 1024 (order: 5, 131072 bytes)          
[    0.014776] xor: measuring software checksum speed                           
[    0.052058]    8regs     :  2303.000 MB/sec                                  
[    0.092087]    8regs_prefetch:  2053.000 MB/sec                              
[    0.132119]    32regs    :  2830.000 MB/sec                                  
[    0.172150]    32regs_prefetch:  2379.000 MB/sec                             
[    0.172158] xor: using function: 32regs (2830.000 MB/sec)                    
[    0.172254] pinctrl core: initialized pinctrl subsystem                      
[    0.172535] random: fast init done                                           
[    0.172998] NET: Registered protocol family 16                               
[    0.173712] cpuidle: using governor menu                                     
[    0.174209] vdso: 2 pages (1 code @ ffffff8008a16000, 1 data @ ffffff8008da4)
[    0.174229] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.    
[    0.174865] DMA: preallocated 256 KiB pool for atomic allocations            
[    0.206444] zynqmp-pinctrl pinctrl: zynqmp pinctrl initialized               
[    0.207341] reset_zynqmp reset-controller: Xilinx zynqmp reset driver probed 
[    0.207888] ARM CCI_400_r1 PMU driver probed                                 
[    0.218008] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages     
[    0.284339] raid6: int64x1  gen()   400 MB/s                                 
[    0.352390] raid6: int64x1  xor()   445 MB/s                                 
[    0.420478] raid6: int64x2  gen()   687 MB/s                                 
[    0.488477] raid6: int64x2  xor()   603 MB/s                                 
[    0.556526] raid6: int64x4  gen()  1042 MB/s                                 
[    0.624548] raid6: int64x4  xor()   742 MB/s                                 
[    0.692631] raid6: int64x8  gen()   980 MB/s                                 
[    0.760642] raid6: int64x8  xor()   745 MB/s                                 
[    0.828683] raid6: neonx1   gen()   726 MB/s                                 
[    0.896734] raid6: neonx1   xor()   851 MB/s                                 
[    0.964809] raid6: neonx2   gen()  1168 MB/s                                 
[    1.032854] raid6: neonx2   xor()  1208 MB/s                                 
[    1.100900] raid6: neonx4   gen()  1507 MB/s                                 
[    1.168937] raid6: neonx4   xor()  1441 MB/s                                 
[    1.236990] raid6: neonx8   gen()  1652 MB/s                                 
[    1.305047] raid6: neonx8   xor()  1535 MB/s                                 
[    1.305056] raid6: using algorithm neonx8 gen() 1652 MB/s                    
[    1.305063] raid6: .... xor() 1535 MB/s, rmw enabled                         
[    1.305071] raid6: using neon recovery algorithm                             
[    1.306167] SCSI subsystem initialized                                       
[    1.306351] usbcore: registered new interface driver usbfs                   
[    1.306389] usbcore: registered new interface driver hub                     
[    1.306433] usbcore: registered new device driver usb                        
[    1.306514] media: Linux media interface: v0.10                              
[    1.306545] Linux video capture interface: v2.00                             
[    1.306592] pps_core: LinuxPPS API ver. 1 registered                         
[    1.306601] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
[    1.306624] PTP clock support registered                                     
[    1.306659] EDAC MC: Ver: 3.0.0                                              
[    1.307046] zynqmp-ipi ff9905c0.mailbox: Probed ZynqMP IPI Mailbox driver.   
[    1.307189] FPGA manager framework                                           
[    1.307308] fpga-region fpga-full: FPGA Region probed                        
[    1.307395] Advanced Linux Sound Architecture Driver Initialized.            
[    1.307765] Bluetooth: Core ver 2.22                                         
[    1.307796] NET: Registered protocol family 31                               
[    1.307805] Bluetooth: HCI device and connection manager initialized         
[    1.307820] Bluetooth: HCI socket layer initialized                          
[    1.307831] Bluetooth: L2CAP socket layer initialized                        
[    1.307866] Bluetooth: SCO socket layer initialized                          
[    1.308484] clocksource: Switched to clocksource arch_sys_counter            
[    1.308577] VFS: Disk quotas dquot_6.6.0                                     
[    1.308629] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)   
[    1.314472] NET: Registered protocol family 2                                
[    1.314843] TCP established hash table entries: 16384 (order: 5, 131072 byte)
[    1.314959] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)      
[    1.315310] TCP: Hash tables configured (established 16384 bind 16384)       
[    1.315419] UDP hash table entries: 1024 (order: 3, 32768 bytes)             
[    1.315465] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)        
[    1.315608] NET: Registered protocol family 1                                
[    1.315855] RPC: Registered named UNIX socket transport module.              
[    1.315864] RPC: Registered udp transport module.                            
[    1.315872] RPC: Registered tcp transport module.                            
[    1.315879] RPC: Registered tcp NFSv4.1 backchannel transport module.        
[    1.316402] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[    1.317874] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters ae
[    1.318595] audit: initializing netlink subsys (disabled)                    
[    1.318965] audit: type=2000 audit(1.312:1): state=initialized audit_enabled1
[    1.319432] workingset: timestamp_bits=62 max_order=19 bucket_order=0        
[    1.320226] NFS: Registering the id_resolver key type                        
[    1.320251] Key type id_resolver registered                                  
[    1.320259] Key type id_legacy registered                                    
[    1.320272] nfs4filelayout_init: NFSv4 File Layout Driver Registering...     
[    1.320297] jffs2: version 2.2. (NAND) (SUMMARY)  �੩ 2001-2006 Red Hat, Inc. 
[    1.343920] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[    1.343939] io scheduler noop registered                                     
[    1.343946] io scheduler deadline registered                                 
[    1.343968] io scheduler cfq registered (default)                            
[    1.343977] io scheduler mq-deadline registered                              
[    1.343985] io scheduler kyber registered                                    
[    1.345232] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed         
[    1.372886] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled         
[    1.374460] arm-smmu fd800000.smmu: probing hardware configuration...        
[    1.374474] arm-smmu fd800000.smmu: SMMUv2 with:                             
[    1.374484] arm-smmu fd800000.smmu:  stage 1 translation                     
[    1.374492] arm-smmu fd800000.smmu:  stage 2 translation                     
[    1.374501] arm-smmu fd800000.smmu:  nested translation                      
[    1.374512] arm-smmu fd800000.smmu:  stream matching with 48 register groups 
[    1.374524] arm-smmu fd800000.smmu:  16 context banks (0 stage-2 only)       
[    1.374536] arm-smmu fd800000.smmu:  Supported page sizes: 0x61311000        
[    1.374546] arm-smmu fd800000.smmu:  Stage-1: 48-bit VA -> 48-bit IPA        
[    1.374557] arm-smmu fd800000.smmu:  Stage-2: 48-bit IPA -> 48-bit PA        
[    1.376154] cacheinfo: Unable to detect cache hierarchy for CPU 0            
[    1.380928] brd: module loaded                                               
[    1.385065] loop: module loaded                                              
[    1.385823] mtdoops: mtd device (mtddev=name/number) must be supplied        
[    1.388467] libphy: Fixed MDIO Bus: probed                                   
[    1.389735] tun: Universal TUN/TAP device driver, 1.6                        
[    1.389961] CAN device driver interface                                      
[    1.390671] usbcore: registered new interface driver asix                    
[    1.390742] usbcore: registered new interface driver ax88179_178a            
[    1.390776] usbcore: registered new interface driver cdc_ether               
[    1.390806] usbcore: registered new interface driver net1080                 
[    1.390838] usbcore: registered new interface driver cdc_subset              
[    1.390869] usbcore: registered new interface driver zaurus                  
[    1.390915] usbcore: registered new interface driver cdc_ncm                 
[    1.391323] xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM          
[    1.393582] usbcore: registered new interface driver uas                     
[    1.393631] usbcore: registered new interface driver usb-storage             
[    1.394383] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rt0
[    1.394447] i2c /dev entries driver                                          
[    1.394686] IR NEC protocol handler initialized                              
[    1.394695] IR RC5(x/sz) protocol handler initialized                        
[    1.394703] IR RC6 protocol handler initialized                              
[    1.394710] IR JVC protocol handler initialized                              
[    1.394718] IR Sony protocol handler initialized                             
[    1.394725] IR SANYO protocol handler initialized                            
[    1.394732] IR Sharp protocol handler initialized                            
[    1.394740] IR MCE Keyboard/mouse protocol handler initialized               
[    1.394748] IR XMP protocol handler initialized                              
[    1.395583] usbcore: registered new interface driver uvcvideo                
[    1.395592] USB Video Class driver (1.1.1)                                   
[    1.395659] ltc2952-poweroff ltc2954: pm_power_off already registered        
[    1.395675] ltc2952-poweroff: probe of ltc2954 failed with error -16         
[    1.396750] cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer at ffffff80090s
[    1.396919] Bluetooth: HCI UART driver ver 2.3                               
[    1.396930] Bluetooth: HCI UART protocol H4 registered                       
[    1.396939] Bluetooth: HCI UART protocol BCSP registered                     
[    1.396970] Bluetooth: HCI UART protocol LL registered                       
[    1.396978] Bluetooth: HCI UART protocol ATH3K registered                    
[    1.396986] Bluetooth: HCI UART protocol Three-wire (H5) registered          
[    1.397027] Bluetooth: HCI UART protocol Intel registered                    
[    1.397036] Bluetooth: HCI UART protocol QCA registered                      
[    1.397081] usbcore: registered new interface driver bcm203x                 
[    1.397118] usbcore: registered new interface driver bpa10x                  
[    1.397155] usbcore: registered new interface driver bfusb                   
[    1.397192] usbcore: registered new interface driver btusb                   
[    1.397201] Bluetooth: Generic Bluetooth SDIO driver ver 0.1                 
[    1.397259] usbcore: registered new interface driver ath3k                   
[    1.397378] EDAC MC: ECC not enabled                                         
[    1.397527] EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac contro)
[    1.398570] sdhci: Secure Digital Host Controller Interface driver           
[    1.398580] sdhci: Copyright(c) Pierre Ossman                                
[    1.398587] sdhci-pltfm: SDHCI platform and OF driver helper                 
[    1.399164] iommu: Adding device ff160000.sdhci to group 0                   
[    1.399732] iommu: Adding device ff170000.sdhci to group 1                   
[    1.400192] ledtrig-cpu: registered to indicate activity on CPUs             
[    1.400362] usbcore: registered new interface driver usbhid                  
[    1.400370] usbhid: USB HID core driver                                      
[    1.401877] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered        
[    1.402634] pktgen: Packet Generator for packet performance testing. Version5
[    1.402918] Netfilter messages via NETLINK v0.30.                            
[    1.403063] ip_tables: (C) 2000-2006 Netfilter Core Team                     
[    1.403217] Initializing XFRM netlink socket                                 
[    1.403300] NET: Registered protocol family 10                               
[    1.403739] Segment Routing with IPv6                                        
[    1.403790] ip6_tables: (C) 2000-2006 Netfilter Core Team                    
[    1.403924] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver              
[    1.404300] NET: Registered protocol family 17                               
[    1.404318] NET: Registered protocol family 15                               
[    1.404341] bridge: filtering via arp/ip/ip6tables is no longer available by.
[    1.404356] Ebtables v2.0 registered                                         
[    1.404442] can: controller area network core (rev 20170425 abi 9)           
[    1.404517] NET: Registered protocol family 29                               
[    1.404527] can: raw protocol (rev 20170425)                                 
[    1.404536] can: broadcast manager protocol (rev 20170425 t)                 
[    1.404548] can: netlink gateway (rev 20170425) max_hops=1                   
[    1.404845] Bluetooth: RFCOMM TTY layer initialized                          
[    1.404858] Bluetooth: RFCOMM socket layer initialized                       
[    1.404874] Bluetooth: RFCOMM ver 1.11                                       
[    1.404892] Bluetooth: BNEP (Ethernet Emulation) ver 1.3                     
[    1.404900] Bluetooth: BNEP filters: protocol multicast                      
[    1.404911] Bluetooth: BNEP socket layer initialized                         
[    1.404920] Bluetooth: HIDP (Human Interface Emulation) ver 1.2              
[    1.404930] Bluetooth: HIDP socket layer initialized                         
[    1.405051] 9pnet: Installing 9P2000 support                                 
[    1.405077] Key type dns_resolver registered                                 
[    1.405472] registered taskstats version 1                                   
[    1.405833] Btrfs loaded, crc32c=crc32c-generic                              
[    1.412972] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 24, base_baud s
[    1.413187] serial serial0: tty port ttyPS1 registered                       
[    1.413555] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 25, base_baud s
[    2.837049] console [ttyPS0] enabled                                         
[    2.842185] xilinx-psgtr fd400000.zynqmp_phy: Lane:1 type:8 protocol:4 pll_ls
[    2.850374] PLL: shutdown                                                    
[    2.853058] PLL: shutdown                                                    
[    2.856052] PLL: enable                                                      
[    2.858551] PLL: shutdown                                                    
[    2.862005] PLL: enable                                                      
[    2.864486] xilinx-dp-snd-codec fd4a0000.zynqmp-display:zynqmp_dp_snd_codec0d
[    2.875123] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm0: Xilinx DisplayPort Sound Pd
[    2.883093] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm1: Xilinx DisplayPort Sound Pd
[    2.891485] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: xk
[    2.903854] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: xk
[    2.916572] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: Xd
[    2.926696] OF: graph: no port node found in /amba/zynqmp-display@fd4a0000   
[    2.933645] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).      
[    2.940179] [drm] No driver support for vblank timestamp query.              
[    2.946162] xlnx-drm xlnx-drm.0: bound fd4a0000.zynqmp-display (ops 0xffffff)
[    4.032499] [drm] Cannot find any crtc or sizes                              
[    4.037147] [drm] Initialized xlnx 1.0.0 20130509 for fd4a0000.zynqmp-displa0
[    4.045175] zynqmp-display fd4a0000.zynqmp-display: ZynqMP DisplayPort Subsyd
[    4.055381] iommu: Adding device fe200000.dwc3 to group 2                    
[    4.061102] xilinx-psgtr fd400000.zynqmp_phy: Lane:2 type:0 protocol:3 pll_ls
[    4.072859] iommu: Adding device fe300000.dwc3 to group 3                    
[    4.078524] xilinx-psgtr fd400000.zynqmp_phy: Lane:3 type:1 protocol:3 pll_ls
[    4.088501] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller                   
[    4.093921] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n1
[    4.101685] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100
[    4.110343] xhci-hcd xhci-hcd.0.auto: irq 33, io mem 0xfe300000              
[    4.116339] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002    
[    4.123055] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
[    4.130254] usb usb1: Product: xHCI Host Controller                          
[    4.135111] usb usb1: Manufacturer: Linux 4.14.0-00061-gebfe386588bf-dirty xd
[    4.142754] usb usb1: SerialNumber: xhci-hcd.0.auto                          
[    4.147942] hub 1-0:1.0: USB hub found                                       
[    4.151636] hub 1-0:1.0: 1 port detected                                     
[    4.155722] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller                   
[    4.161136] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n2
[    4.168813] usb usb2: We don't know the algorithms for LPM for this host, di.
[    4.176921] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003    
[    4.183628] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
[    4.190831] usb usb2: Product: xHCI Host Controller                          
[    4.195689] usb usb2: Manufacturer: Linux 4.14.0-00061-gebfe386588bf-dirty xd
[    4.203329] usb usb2: SerialNumber: xhci-hcd.0.auto                          
[    4.208434] hub 2-0:1.0: USB hub found                                       
[    4.212123] hub 2-0:1.0: 1 port detected                                     
[    4.260485] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using t
[    4.274828] sdhci-arasan ff170000.sdhci: allocated mmc-pwrseq                
[    4.318517] mmc0: new high speed SDHC card at address 59b4                   
[    4.324145] mmcblk0: mmc0:59b4 USDU1 14.9 GiB                                
[    4.328645] mmc1: SDHCI controller on ff170000.sdhci [ff170000.sdhci] using t
[    4.337676]  mmcblk0: p1 p2                                                  
[    4.343967] input: gpio-keys as /devices/platform/gpio-keys/input/input0     
[    4.350911] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:0)
[    4.359104] of_cfs_init                                                      
[    4.361548] of_cfs_init: OK                                                  
[    4.365743] ALSA device list:                                                
[    4.368630]   #0: DisplayPort monitor                                        
[    4.374588] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incoms
[    4.383068] sdhci-arasan ff170000.sdhci: card claims to support voltages bele
[    4.403877] mmc1: new high speed SDIO card at address 0001                   
[    4.410221] wl18xx_driver wl18xx.1.auto: Direct firmware load for ti-connect2
[    4.420807] wl18xx_driver wl18xx.1.auto: Direct firmware load for ti-connect2
[    4.431433] wlcore: ERROR could not get configuration binary ti-connectivity2
[    4.440194] wlcore: WARNING falling back to default config                   
[    4.504492] usb 1-1: new high-speed USB device number 2 using xhci-hcd       
[    4.514256] EXT4-fs (mmcblk0p2): recovery complete                           
[    4.521275] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. )
[    4.529331] VFS: Mounted root (ext4 filesystem) on device 179:2.             
[    4.537691] devtmpfs: mounted                                                
[    4.540818] Freeing unused kernel memory: 512K                               
[    4.657083] usb 1-1: New USB device found, idVendor=0424, idProduct=2744     
[    4.663735] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.670845] usb 1-1: Product: USB2744                                        
[    4.674476] usb 1-1: Manufacturer: Microchip Tech                            
[    4.680947] hub 1-1:1.0: USB hub found                                       
[    4.684678] hub 1-1:1.0: 4 ports detected                                    
[    4.761042] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)               
[    4.770268] wlcore: loaded                                                   
[    4.777265] systemd[1]: System time before build time, advancing clock.      
[    4.784555] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd       
[    4.800829] systemd[1]: systemd 237 running in system mode. (-PAM -AUDIT -SE)
[    4.822506] usb 2-1: New USB device found, idVendor=0424, idProduct=5744     
[    4.822556] systemd[1]: Detected architecture arm64.                         
[    4.834079] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[    4.834084] usb 2-1: Product: USB5744                                        
[    4.834087] usb 2-1: Manufacturer: Microchip Tech                            
[    4.841378] hub 2-1:1.0: USB hub found                                       
[    4.844912] hub 2-1:1.0: 3 ports detected                                    

Welcome to Poky (Yocto Project Reference Distro) 2.5 (sumo)!                    

[    4.871447] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIIni2
[    4.881382] Bluetooth: hci0: request_firmware failed(errno -2) for ti-connecs
[    4.890567] Bluetooth: hci0: download firmware failed, retrying...           
[    4.905213] systemd[1]: Set hostname to <ultra96>.                           
[    5.004524] usb 1-1.4: new high-speed USB device number 3 using xhci-hcd     
[    5.035164] systemd[1]: File /lib/systemd/system/systemd-journald.service:35.
[    5.052166] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warn)
[    5.109443] usb 1-1.4: New USB device found, idVendor=0424, idProduct=2740   
[    5.116267] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumbe0
[    5.123564] usb 1-1.4: Product: Hub Controller                               
[    5.123953] systemd[1]: Created slice System Slice.                          
[    5.132825] usb 1-1.4: Manufacturer: Microchip Tech                          
[  OK  ] Created slice System Slice.                                            
[    5.148844] systemd[1]: Created slice system-serial\x2dgetty.slice.          
[  OK  ] Created slice system-serial\x2dgetty.slice.                            
[    5.164669] systemd[1]: Listening on udev Kernel Socket.                     
[  OK  ] Listening on udev Kernel Socket.                                       
[    5.180743] systemd[1]: Listening on Journal Socket.                         
[  OK  ] Listening on Journal Socket.                                           
[    5.196732] systemd[1]: Listening on udev Control Socket.                    
[  OK  ] Listening on udev Control Socket.                                      
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.                    
[  OK  ] Created slice system-getty.slice.                                      
         Mounting POSIX Message Queue File System...                            
         Mounting Huge Pages File System...                                     
         Starting udev Coldplug all Devices...                                  
[  OK  ] Listening on Network Service Netlink Socket.                           
[  OK  ] Started Forward Password Requests to Wall Directory Watch.             
         Mounting Kernel Debug File System...                                   
         Starting Create Static Device Nodes in /dev...                         
[    5.324551] [drm] Cannot find any crtc or sizes                              
[  OK  ] Listening on Syslog Socket.                                            
[  OK  ] Reached target Slices.                                                 
         Starting Remount Root and Kernel File Systems...                       
[    5.373613] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)                    
         Starting Apply Kernel Variables...                                     
[  OK  ] Listening on Journal Socket (/dev/log).                                
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.         
[  OK  ] Reached target Paths.                                                  
[  OK  ] Reached target Remote File Systems.                                    
[  OK  ] Listening on Journal Audit Socket.                                     
[    5.447412] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIIni2
[    5.459739] Bluetooth: hci0: request_firmware failed(errno -2) for ti-connecs
[    5.468921] Bluetooth: hci0: download firmware failed, retrying...           
         Mounting Kernel Configuration File System...                           
[  OK  ] Reached target Swap.                                                   
         Mounting Temporary Directory (/tmp)...                                 
         Starting Journal Service...                                            
[  OK  ] Mounted POSIX Message Queue File System.                               
[  OK  ] Mounted Huge Pages File System.                                        
[  OK  ] Mounted Kernel Debug File System.                                      
[  OK  ] Started Create Static Device Nodes in /dev.                            
[  OK  ] Started Journal Service.                                               
[  OK  ] Started Remount Root and Kernel File Systems.                          
[  OK  ] Started Apply Kernel Variables.                                        
[  OK  ] Mounted Kernel Configuration File System.                              
[  OK  ] Mounted Temporary Directory (/tmp).                                    
         Starting Rebuild Hardware Database...                                  
         Starting Flush Journal to Persistent Storage...                        
[  OK  ] Reached target Local File Systems (Pre).                               
         Mounting /var/volatile...                                              
[  OK  ] Mounted /var/volatile.                                                 
[  OK  ] Reached target Local File Systems.                                     
         Starting Rebuild Journal Catalog...                                    
[    5.738264] systemd-journald[2067]: Received request to flush runtime journa1
[  OK  ] Started Flush Journal to Persistent Storage.                           
         Starting Create Volatile Files and Directories...                      
[  OK  ] Started Rebuild Journal Catalog.                                       
[  OK  ] Started udev Coldplug all Devices.                                     
[  OK  ] Started Create Volatile Files and Directories.                         
[    6.023450] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIIni2
[    6.033414] Bluetooth: hci0: request_firmware failed(errno -2) for ti-connecs
[    6.042598] Bluetooth: hci0: download firmware failed, retrying...           
[    6.599643] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIIni2
[    6.609633] Bluetooth: hci0: request_firmware failed(errno -2) for ti-connecs
[    6.618845] Bluetooth: hci0: download firmware failed, retrying...           
[  OK  ] Started Rebuild Hardware Database.                                     
         Starting Update is Completed...                                        
         Starting udev Kernel Device Manager...                                 
[  OK  ] Started Update is Completed.                                           
[  OK  ] Started udev Kernel Device Manager.                                    
[  OK  ] Reached target System Initialization.                                  
[  OK  ] Started Daily Cleanup of Temporary Directories.                        
[  OK  ] Reached target Timers.                                                 
[  OK  ] Listening on dropbear.socket.                                          
[  OK  ] Listening on D-Bus System Message Bus Socket.                          
[  OK  ] Reached target Sockets.                                                
[  OK  ] Reached target Basic System.                                           
[  OK  ] Started Getty on tty1.                                                 
[  OK  ] Started Kernel Logging Service.                                        
[  OK  ] Started System Logging Service.                                        
[  OK  ] Started D-Bus System Message Bus.                                      
         Starting Network Service...                                            
[  OK  ] Found device /dev/ttyPS0.                                              
[  OK  ] Started Network Service.                                               
[  OK  ] Reached target Network.                                                
[  OK  ] Reached target Bluetooth.                                              
[  OK  ] Started Serial Getty on ttyPS0.                                        
[  OK  ] Reached target Login Prompts.                                          
[  OK  ] Reached target Multi-User System.                                      
[  OK  ] Reached target Sound Card.                                             

Poky (Yocto Project Reference Distro) 2.5 ultra96 ttyPS0                        

ultra96 login: